Music Thing Spring Reverb Mkii Kits – SPRING BUNDLE DEAL

• Works with a variety of spring reverb tanks (optional), or with the Accutronics BTDR-2 reverb ‘brick’ designed by Brian Neunaber (optional)
• Vactrol (VTL5C3) crossfade between dry and wet (vactrol circuits are variable in their ability to go completely 100% wet, like the Make Noise Echophon for example)
• Tilt EQ on the reverb send to tune the voice of the reverb
• X-Fade input so the module can also be used as a standalone vactrol crossfader (crossfade demo)
• Feedback circuit with positive and negative phase
• Attenuverter on the crossfade CV input
• 6hp wide (NB: If using the brick, mounted horizontally, the brick extends 5mm over the PCB to the left of the module, around 25mm back from the front panel, so mount the reverb next to a shallow module)
• Expander with Front panel mount Phono sockets & Crossfade between reverb types.
• You can use both a Spring Tank and a Digital Brick with one Spring Reverb Module, to use a Tank and Brick at the same time you’ll need the Spring Reverb Expander

Spring Reverb Expander

The Music Thing Spring Reverb Expander is designed to connect to the Music Thing Modular Spring Reverb Mkii. The expander adds the ability to blend the reverb tank and brick outputs and manually crossfade between the two. This module also adds the option to connect to your reverb tank from the front panel rather than the back PCB of the main Spring Reverb module. This expander is passive so doesn’t require a power cable.

Note: This expander is only compatible with the MTM Spring Reverb Mkii – It will not work with older revisions.

Build Document: https://www.thonk.co.uk/documents/springreverb/

Features:

• Front panel Send & Return sockets to Reverb Tank
• Set blend level between Spring Tank and Brick Outputs
• 3HP Front Panel – In Silver or Black Aluminium

Music Thing Modular T-Shirt

• Gildan Premium Cotton Ring Spun T-Shirt
• Screenprinted on front.
• Printed in Wales, UK
• Custom Thonk nape print
• Custom Thonk sleeve tag
• Fabric 100% ring-spun Cotton pre-shrunk jersey knit
• Weight 185g/m² (180g/m² White)
• 2,2cm collar
• Taped neck and shoulders
• Twin needle sleeve and bottom hems
• Quarter-turned to eliminate centre crease

  Refunds and returns on clothing products are only available within the UK – Clothing must be returned within 2 weeks of purchase – Clothing must be returned unopened unless there is a discrepancy in the label size and actual size. See Terms & Conditions for returns process.