DIY version of Bastl Instruments CV TRINITY EXPANDER
NOTE THIS MODULE DOES NOT WORK ON ITS OWN!
It is an expander for the CV TRINITY module. It only works when connector to the CV TRINITY module. The CV TRINITY itself is not available as a DIY kit.
CV TRINITY EXPANDER
The CV Trinity Expander adds 6 trigger inputs – one for each channel. For LFO and AUTOMATION these work as individual reset inputs and for ADSR they act as re-trigger. It doesn’t work without the CV Trinity Eurorack module.
Features
- 6 trigger input expander for the CV Trinity Eurorack module
- channel independent reset inputs for LFO and Automation mode
- channel independent re-trigger inputs for ADSR mode
Technical details
- 2HP
- powered from the CV Trinity module
More
- Manual – PDF download
- DIY kit instructions
- Schematics and board diagram – PDF
For the successful completion of this kit you will need the following tools:
- Soldering iron (15-20W will do)
- multi-meter
- protective eyewear
- flush cutters
- n2. hex screwdriver or allen key
- phillips screwdriver.
- one afternoon of free time
DIY Kit is containing:
- All necessary components
- Amount of tin that should be “just enough and a bit more”
- Oak wood lasercutted panel (no polish, feel free to paint it!)
- screws to mount you module in your rack
- Printed product manual
- Supercool bastl sticker
- Tons of soldering fun!
The complete step-by-step assembly guide can be found HERE.
And dont be afraid of messing it up! If you will end up with malfuctional unit you can always let your module to come to daddy for repair;)
