High Towers is a new super-flexible clocking module. At its heart the module is based on the principles of clock division of an incoming clock signal, with 4 assignable outputs, each of which can be assigned a clock division in the following different ways:
- manually assigned using a knob
- assigned by external CV (in which case the associated knob becomes a CV attenuator)
- assigned by one of High Towers’ internal presets
High Towers has two main modes of operation; ‘Gates’ and ‘Cues’, selected by a switch on the front panel. When in the ‘Gates’ configuration, High Towers performs much like a regular clock divider that you may already be familiar with, just with added features. When in the ‘Cues’ configuration, High Towers sends out short pulses ‘on cue’ at an interval. The cue for when the pulse occurs can be shifted with the ‘mode’ knob, and the intervals can be changed with the ‘division’ knobs.
For further information see the High Towers User Manual below.
High Towers – Build Document | User Manual
Specs
- Depth: 35mm
- Width: 10HP
- 12V draw: 15mA
- -12V draw: 11mA