RackPlumber is a patch cable remote extension solution for Eurorack modular. Each RackPlumber kit includes two modules which are connected via ethernet (RJ45) cable – allowing for simple connections between large or spread-out racks, or between two entirely separate cases. A total of 8 x audio and/or CV signals can be patched simultaneously between each pair.
The RackPlumber has two ethernet connectors available per module – One on the front panel for connecting between two cases, and another on the back of the module for creating “shortcuts” inside a big rack. It’s also possible to chain a few RackPlumbers and achieve a passive multiple.
Jack LEDs monitor if there is a signal in each input, these LEDs are bypassed when a patch cable is inserted to prevent voltage drop. A 1.5 meter long network cable is included with each kit.
Note: the colour of the Jack LEDs may be different than in the picture
3U RackPlumber – Build Guide
Specs:
- Width: each module is 4HP
- Depth: 25mm
- Power: Passive (Module does not draw current)
