Tsyklon Labs – Eurorack Cable Tester PCB Only
If you are a DIY Synth novice, this is a great and useful PCB to strengthen your DIY skills. If you are a veteran [or, as they like to say at Tsyklon Labs – “Hero of Synthesizer DIY”], then this PCB...
View ArticleTsyklon Labs – Eurorack Cable Tester Full DIY Kit
If you are a DIY Synth novice, this is a great and useful bit of kit to strengthen your DIY skills. If you are a veteran [or, as they like to say at Tsyklon Labs – “Hero of Synthesizer DIY”], then this...
View ArticleClik here to view.
Triple WaveFolder (TWF) – Barcode/Toppobrillo Panel and PCB
This set includes: Barcode 14hp Black Eurorack Panel Barcode Panel PCB (for pots jacks etc) Toppobrillo TWF PCB Two great video demos from Gary Stone, embedded with permission. TWF Documentation – BOM,...
View ArticleClik here to view.
Sonic Potions ‘Penrose’ Quantiser Full DIY Kit
Penrose is a simple CV quantizer DIY kit for the eurorack format. It takes an incoming continuous CV voltage and converts it to the nearest note in a scale. Active notes can be selected with the 12...
View ArticleClik here to view.
Sonic Potions ‘Mal-2’ Random CV Full DIY Kit
Demos Mal-2 is set to a slightly modulated random walk that controls a penrose quantizer playing a braids fold osc. The fold value is controlled by another Mal-2 module set to a slow random...
View ArticleClik here to view.
Music Thing Modular – Radio Music Full DIY Kit
V2.1 PCB set, one minor fix – some users had found the switch a little tight to fit. This is a full kit which includes every single component to build a Radio Music module right down to the Teensy...
View ArticleMusic Thing Modular – Turing Machine Mkii Full DIY Kit
This kit includes everything you need to build the Mkii version of the Turing Machine. You just need to provide the tools and solder. Comes with 1ohp Aluminium Eurorack panel. Since it was launched in...
View ArticleClik here to view.
Music Thing Modular – Chord Organ Full DIY Kit
Chord Organ is a new firmware for the Music Thing Modular Radio Music module. It gives the module a completely different function. Instead of playing samples from the SD card, it synthesises chords. On...
View ArticleHorstronic Arcade Button – Full DIY Kit
This is full DIY Kit to build a Horstronic 6hp Arcade Button module. There is no build doc provided, but it has a BOM, good photos and a build thread on Muffwiggler. It is a 6HP module that features 2...
View ArticleHorstronic Joystick – Full DIY Kit
This is full DIY Kit to build a Horstronic 14hp Joystick module. There is no build doc provided, but it has a BOM, good photos (linked above) and a build thread on Muffwiggler. The joystick can output...
View ArticleClik here to view.
Befaco ‘Chopping Kinky’– Full DIY Kit
Chopping kinky is a voltage controllable, dual channel Wavefolder. A wavefolder converts simple signals into richer and more dynamically changing ones. In contrast to a filter, wavefolding adds...
View ArticleErica Synths – Wogglebug
Grant Ritcher’s DIY Wogglebug for eurorack standard! A design which has been greatly popularised by Make Noise, it offers great random modulation, clock and a sound source. We recalculated component...
View ArticleEurorack SERGE Triple+ Waveshaper (TWS+) Full DIY Kit
THIS IS A FULL DIY KIT – ALL SMD COMPONENTS COME PRE-SOLDERED The TRIPLE WAVESHAPER (TWS) is a non-linear modifier which can transform a sawtooth wave into a sine wave. This classic module incorporates...
View ArticleErica Synths – Polivoks Range
These Panel/PCB/Rare parts sets from Erica Synths bring the raw power of the legendary Soviet POLIVOKS synth to Eurorack. VCO I & II info, documentation –...
View ArticleTsyklon Labs – Sputnik Expander
This is a Partial kit including Panel, PCB and expander cable. BOM and build manual here. Want to change your CHAOS DIVIDER clock divider into a frequency divider? Flip the “Division” switch, Comrade!...
View ArticleFrogleg Synthesis – Beetle Power Supply PCB
IDEAL FOR SMALL LUNCHBOX CASES AND STANDALONE INSTRUMENTS The “Beetle 1.3” provides a simple way to generate 12VDC bipolar power without the need for an AC wall wart. The PCB is designed to host a...
View ArticleClik here to view.
RNA Replicator – Panel / PCB Set
The Replicator is a 6hp versatile CV Buffer featuring 8 buffered outputs as well as 2 buffered inverted outputs. The toggle switch inverts the voltage to the bottom 4 outputs, and 2 bi-polar LEDs show...
View ArticleTuring Expanders – Voltages, Vactrol Mix, Pulses Mk I Panel/PCB
The Flat Top LEDs used for the new style panels are the Kingbright L-424IDT.
View ArticleTuring Machine Expander VOLTS PCB/PANEL SET
NOTE: This is a PCB and Eurorack panel only, for the complete kits go here This module is compatible with all versions of the Turing Machine. With the older Mki Turing Machine the Backpack module is...
View ArticleTuring Machine Expander PULSES MK II PCB/PANEL SET
NOTE: This is a PCB and Eurorack panel only, for the complete kits go here Thonk build documentation is here – https://www.thonk.co.uk/Documents/turing2016/pulses-mk2/ This module is compatible with...
View Article