Clik here to view.
Noise Technology – PCBSNR Noise Device – Full DIY Kit
The PCBSNR (printed circuit board simple n radical) is a simple and low power portable noise device based on the Radical Chip, which is a collaboration between Max Wainwright and John Richards (Dirty...
View ArticlePatching Panda – Ephemere – Full DIY Kit
Ephemere is a two-channel, voltage-controlled buffer for recording and playing back CV signals such as LFOs, envelopes, trigger patterns, or sequences. Each independent channel features latching play...
View ArticleClik here to view.
LPZW.Modules – PO-Series Eurorack Adaptor – DIY Kit
Adapt a Teenage Engineering Pocket Operator for use as a 12HP Eurorack module. This DIY Kit comes with all SMD components already pre-soldered and contains all the other components needed to build the...
View ArticleClik here to view.
Frequency Central – Microbus – Full DIY Kit
The FCUK Microbus power supply is designed to be an inexpensive solution for small Eurorack systems. Microbus is a variant of FC Power, integrating 8 power headers onto a small power PCB. The Microbus...
View ArticleClik here to view.
Landscape – SOUNDWICH – Full DIY Kit
View this post on Instagram A post shared by LANDSCAPE (@landscape_fm) View this post on Instagram A post shared by LANDSCAPE (@landscape_fm) View this post on Instagram A post shared by LANDSCAPE...
View ArticleClik here to view.
Davies 1900h Clone Knobs
BULK DISCOUNT | 10+ – 5% | 25+ – 7% | 100+ – 10% | 500+ – 20% | (Bulk prices are calculated once items are added to your cart) Pair with the new MXR knob in the same colour range. New Black 1900h...
View ArticleClik here to view.
ALM – Decksaver Cover for 3U 84HP Case
Official Decksaver cover for the ALM 3U 84hp case kit. Keeps your system protected, dust free and looking fresh. Just deep enough to leave modules patched without getting too Ackbar. Embedded crystal...
View ArticleClik here to view.
ALM – Eurorack Powered Case Kit (6U – 84HP)
ALM present a new 84HP wide, 6U eurorack case design with an integrated power supply. Comes as an easy to assemble flat-packed kit – just a Phillips screwdriver is needed for assembly. No soldering....
View ArticleClik here to view.
ALM – Eurorack Powered Case Kit (3U – 84HP)
ALM present a new 84HP wide, 3U eurorack case design with an integrated power supply. Comes as an easy to assemble flat-packed kit – just a Phillips screwdriver is needed for assembly. No soldering....
View ArticleClik here to view.
Sonic Potions ‘Penrose’ Quantiser Full DIY Kit
Black Frontpanel Edition Penrose is a simple CV quantizer DIY kit for the eurorack format. It takes an incoming continuous CV voltage and converts it to the nearest note in a scale. Active notes can...
View ArticleClik here to view.
Zlob Modular – VC F3DB – Panel & PCB Set
The VC F3DB is a Voltage Controlled Fixed Filter Feedback Distortion Bank. The simplest description of the module is that it’s an analog six band vc fixed filter bank. But with the additions of so...
View ArticleClik here to view.
Zlob Modular – VC F3DB – Full DIY Kit
The VC F3DB is a Voltage Controlled Fixed Filter Feedback Distortion Bank. The simplest description of the module is that it’s an analog six band vc fixed filter bank. But with the additions of so...
View ArticleClik here to view.
CCTV – Atari Goth Console – Full DIY Kit
The Atari Goth console is a beginner-friendly patchable drone synth, based on the popular and iconic Atari Punk Console designed by Forrest Mims in 1982. This version has 3.5mm jacks to play nicely...
View ArticleClik here to view.
CCTV – Filther VCF – Full DIY Kit
Filther is an Oberheim inspired 4-pole low pass Voltage Controlled Filter, with CV control over resonance, V/Oct Tracking, and 2 resonant filth modes waiting to be engaged. The core filter block takes...
View ArticleClik here to view.
AtoVProject – Gaeto – Full DIY Kit
The AtoVproject Gaeto is a new type of clocked logic module for Eurorack. Gaeto is a great module to play around with triggers, gates and legatoes turning one into the other! The name ‘Gaeto’ is from...
View ArticleClik here to view.
Fonitronik Cascade Full Kit
This is a full DIY kit to build this 4hp 66mm deep eurorack module. All parts are included right down to the knobs, power cable and screws. Illustrated Build Document and Fonitronik Manual –...
View ArticleClik here to view.
Rebel Technology – WITCH – Full DIY Kit
The Witch is a new desktop synthesizer based on the Rebel Technology Owl platform. The Witch can be used Standalone, with a MIDI Controller, Analog Sequencer, or MIDI Polyphonic Expression / MPE...
View ArticleClik here to view.
CCTV – Nerve Centre – Full DIY Kit
The Nerve Center is an easy to build and adaptable 10HP Eurorack mixer able to meet any of your mixing needs. It can be a 4:1 mono mixer, two 2:1 stereo mixers, individual attenuators, or any...
View ArticleClik here to view.
CCTV – Quadtec 101 – Full DIY Kit
The Quadtec-101 is a dual waveshaping oscillator module with four outputs. The module contains 2 digital oscillators powered by a 16-bit 120MHz DSP and realised by 4 x 8-bit DACs (upgradeable to 12...
View Article