Shakmat Modular – Time Wizard – Full DIY Kit
The Shakmat Modular Time Wizard is an 8HP sextuple clock divider. The module features individual division control for all six outputs and there are different division options available depending on...
View ArticleClik here to view.
Beast-Tek – Microbe Sequencer – Full DIY Kit
The Microbe Sequencer is a cut-down version of its big brother Amoeba – sharing some of the same beat patterns but also containing a set of totally new beats. To squeeze it into 10hp some of the...
View ArticleClik here to view.
God’s Box ‘Loose Fruit’ WaveShaper. FULL DIY KIT
Loose Fruit packs two waveshapers and a crossfader combined into one module and is designed for sculpting rich harmonic timbres. Originally intended for use with ‘single note’ waveforms including...
View ArticleClik here to view.
God’s Box ‘Lollipop’ Compressor. FULL DIY KIT
The Lollipop is a studio grade dual-mode analog mono compressor designed specifically for Eurorack. Two different compression modes – FET and Vactrol – give two different flavours of compression....
View ArticleClik here to view.
Music Thing Modular – Chord Organ Full DIY Kit
Chord Organ is a new firmware for the Music Thing Modular Radio Music module. It gives the module a completely different function. Instead of playing samples from the SD card, it synthesises chords. On...
View ArticleClik here to view.
Music Thing Modular – Radio Music Full DIY Kit
V2.1 PCB set, one minor fix – some users had found the switch a little tight to fit. This is a full kit which includes every single component to build a Radio Music module right down to the Teensy...
View ArticleClik here to view.
Dreadbox Lil’ Erebus – Eurorack Full DIY Kit
The Lil’ Erebus is an analog paraphonic Eurorack full synth voice based on the original Dreadbox Erebus. The module features two oscillators with individual level and tune controls which you can...
View ArticleExpert Sleepers – Select Bus Breakout – Full DIY Kit
The video below demonstrates using the Select Bus module to control 3 x Disting MK4’s polyphonically The Select Bus Breakout provides access to the MIDI-based Select Bus protocol as used by some Expert...
View ArticleExpert Sleepers – Disting MK4 MIDI Expander – Full DIY Kit
Kit level: Easy – Perfect beginners kit! Contains everything you need except tools, time and solder. The Expert Sleepers Disting MK4 MIDI Expander allows you to take full advantage of the new...
View ArticleClik here to view.
Flight of Harmony – Plague Bearer Full DIY Kit
The Plague Bearer is called a filter, but that is just a description of the circuit topology, what it can actually do goes way beyond that. It has been described as a filter, a waveshaper, a mangler,...
View ArticleClik here to view.
Flight of Harmony – IMP Full DIY Kit
The IMP is a tonal noise generator designed to bring ethereal voices, growling drones, abrasive and tonal noise to your Eurorack format modular. How does the IMP produce such a wide palette of sounds?...
View ArticleClik here to view.
Flight of Harmony – Choices Full DIY Kit
The Choices joystick module was designed to pack as much utility in as little space as possible while keeping with the design philosophy of f(h). Choices uses a joystick assembly that has 90° arc of...
View ArticleShakmat Modular – Clock O’ Pawn – Full DIY Kit
The Clock O’Pawn is a versatile clock sourcing Eurorack module, that’s been designed to be the master clock for your system. Clock O’Pawn boasts four different clock generation sources, with dual...
View ArticleShakmat Modular – White Gallop – Full DIY Kit
The White Gallop is a limited edition companion of the Shakmat Knight’s Gallop. The White Gallop is less focused on the algorithmic side of rhythm generation and instead provides more assymetrical and...
View ArticleTempco Resistor – Akaneohm 1% 3300ppm
Akaneohm 1% Tempco resistors. 1K, 1.87K, 2K and 10K available. 3300ppm. All resistors are 1/6W These resistors are all half the physical size of your typical 0.25W resistors apart from the 10K which is...
View ArticleCornfield Electronics – ArduTouch Synthesizer – Full DIY Kit
The ArduTouch is a new Arduino-compatible music synth kit. It’s fully open source – everything you need to put this together is available on the ArduTouch GitHub. The ArduTouch is similar to the...
View ArticleMutable Instruments CVpal – Full DIY Kit
Do-it-yourself USB MIDI interface, 4hp Aluminium panel. Kit includes everything you need, with a pre-programmed chip. Mutable Instruments dreamt of a really simple DIY kit – so simple that it would...
View ArticleBefaco ‘STMIX’– Full DIY Kit
The STMix is a four channel stereo mixer in 6 HP. The STMix can work independently or as an expansion to the HEXMIX System via a 6 pin connector on the back of the module. As well as 4 stereo...
View ArticleBefaco ‘Kickall’– Full DIY Kit
Kickall is a 6HP compact synth voice that features everything needed to make a big fat kick-drum sound: A stable VCO that tracks V/oct, a couple of VCAs, envelopes for volume and pitch and an...
View Article